Parts & Assembly

Assembly Instructions

Click on the Video below to watch our Assembly Video

We have pre-assembled over 104 pieces so you need to assemble just 5, plus the casters and tilt adjustment wheel. All tools and accessories necessary to assemble the table are included in a sealed plastic bag. Aside from the 5 commercial wheels/casters and the 4-pitch wheel, there are only 5 parts to assemble.

1 The base will arrive in 3 pieces. Slide the 2 ends of the base into the welded center. Secure the 3 base pieces together with the provided bolts. Attach 8 Allen bolts (item 7) horizontally using Allen wrench (item 9) as shown in the diagram.  

2 Screw the 5 wheels/casters (item 5) into the threaded holes on the bottom of the base (item 1). Tighten the wheels/casters with the provided wrench (item 10).The wheels/casters must be tightened in order for the table to function properly.  

3 To attach the vertical pole (item 3), align the holes at the base of the vertical pole with the holes on the top of the welded base (item 1) as shown in the diagram.The swing-locking knob on the vertical pole must face the length of the welded base, as shown in diagram, for the table to function properly. Attach the 4 Allen bolts (item 6) vertically using Allen wrench (item 9) and wrench (item 10), as shown in the diagram.

4 Screw the 4-pitch wheel (item 4) handle side up, as shown in the diagram, onto the top of the vertical pole (item 3).

5 2 set Allen screws are in place on the base of the table top (item 2). Align those 2 set Allen screws with the holes in the top of the vertical pole (item 3) and attach using Allen wrench (item 8). The length of the table top must be parallel to the length of the welded base (item 1), as shown in the diagram, for the table to function properly.

-If you prefer to lock the table top tilt in 1 position, tighten the 4 friction locks beneath the table top.

-To unlock the table top to swing 360 degrees without moving the base please unlock the swing knob (by turning it counter clockwise all the way out) and to lock the top with the base please lock the swing knob (by turning it clockwise all the way in)

View Packaging  View Assembly Instructions Diagram